# Legacy Software **URL:** https://community.mobotix.com/c/legacy-software/17.md [Latest](https://community.mobotix.com/latest.md) · [Categories](https://community.mobotix.com/categories.md) · [Tags](https://community.mobotix.com/tags.md) --- ## [About the Legacy Software category](https://community.mobotix.com/t/about-the-legacy-software-category/27)
**Author:** [@Mx-Community](https://community.mobotix.com/u/Mx-Community)\ **Replies:** 0
User forum for discussions about MOBOTIX legacy software such as MxControlCenter, MxEasy and MxServer. Here at MOBOTIX Community we incentivize user interaction: feel free to ask your questions or help others. DISCLAI… --- ## [Clean Re-installation of MxControlCenter](https://community.mobotix.com/t/clean-re-installation-of-mxcontrolcenter/4233)
**Author:** [@MXDanielG](https://community.mobotix.com/u/MXDanielG)\ **Replies:** 2\ **Last updated:** [November 9, 2023, 11:07am UTC](https://community.mobotix.com/t/clean-re-installation-of-mxcontrolcenter/4233 "2023-11-09T11:07:23Z")
The instructions for the clean re-install of MxCC are as follows. Back up MxCC configuration file from File \> Save As… or search for the mxcc.ini file on the computer Complete a normal uninstall of MxCC through W… --- ## [MxEasy1.61 benötigt Administrator Recht um Türöffner schalten zu können](https://community.mobotix.com/t/mxeasy1-61-benotigt-administrator-recht-um-turoffner-schalten-zu-konnen/1727)
**Author:** [@Dragonfly](https://community.mobotix.com/u/Dragonfly)\ **Replies:** 0\ **Last updated:** [October 9, 2019, 10:08am UTC](https://community.mobotix.com/t/mxeasy1-61-benotigt-administrator-recht-um-turoffner-schalten-zu-konnen/1727 "2019-10-09T10:08:23Z")
Guten Tag, wir benutzen an 15 Windows10 (1903) Clients MxEasy 1.61 um den Türöffner an unserer T25 zu betätigen. An einen einzelnen Client öffnet nun der Türöffner nur, wenn MxEasy mit administrativen Rechten gestartet… --- ## [Doorbell - remote stations configuration not saved correctly](https://community.mobotix.com/t/doorbell-remote-stations-configuration-not-saved-correctly/5222)
**Author:** [@sasso](https://community.mobotix.com/u/sasso)\ **Replies:** 6\ **Last updated:** [May 6, 2022, 9:55am UTC](https://community.mobotix.com/t/doorbell-remote-stations-configuration-not-saved-correctly/5222 "2022-05-06T09:55:17Z")
Hey everyone, this is my first post here. I am trying to figure out how to configure doorbell remote stations on mxeasy. I know it’s legacy and no support is given, nontheless I’ve inherited this system and I do intend… --- ## [Kamera kann vom Contol Center nicht aufgerufen werden](https://community.mobotix.com/t/kamera-kann-vom-contol-center-nicht-aufgerufen-werden/2552)
**Author:** [@peter9](https://community.mobotix.com/u/peter9)\ **Replies:** 1\ **Last updated:** [May 6, 2020, 7:53pm UTC](https://community.mobotix.com/t/kamera-kann-vom-contol-center-nicht-aufgerufen-werden/2552 "2020-05-06T19:53:55Z")
Ich habe vor 3 Monaten die Adressen mehrere Kameras mit dem Control Center auf einen einheitlichen Adressbereich einstellen können. Die Bilder wurden auch am gemeinsamen PC angezeigt. Dann war plötzlic… --- ## [Error 103 Searching Timestamp](https://community.mobotix.com/t/error-103-searching-timestamp/1954)
**Author:** [@rehanshaaz](https://community.mobotix.com/u/rehanshaaz)\ **Replies:** 0\ **Last updated:** [December 3, 2019, 6:18pm UTC](https://community.mobotix.com/t/error-103-searching-timestamp/1954 "2019-12-03T18:18:46Z")
Error 103 Searching Timestamp while exporting and camera not recording --- ## [MxCC Troubleshooting Guide](https://community.mobotix.com/t/mxcc-troubleshooting-guide/366)
**Author:** [@Mx-MichaelD](https://community.mobotix.com/u/Mx-MichaelD)\ **Replies:** 0\ **Last updated:** [May 21, 2018, 5:50am UTC](https://community.mobotix.com/t/mxcc-troubleshooting-guide/366 "2018-05-21T05:50:44Z")
1. Introduction This document provides the initial steps to effectively troubleshoot issues with MxCC. In the event that the issue needs to be escalated to MOBOTIX Technical Support, by following this document, the requi… --- ## [How to create a Time Lapse with MxControlCenter](https://community.mobotix.com/t/how-to-create-a-time-lapse-with-mxcontrolcenter/67)
**Author:** [@AdrianS](https://community.mobotix.com/u/AdrianS)\ **Replies:** 0\ **Last updated:** [January 28, 2018, 10:38pm UTC](https://community.mobotix.com/t/how-to-create-a-time-lapse-with-mxcontrolcenter/67 "2018-01-28T22:38:45Z")
Introduction The objective of this post is to explain how to generate a Time Lapse using MxControlCenter. For this purpose we will use MxControlCenter 2.5.3.5 x64 bit and a Q25 camera. Procedure Step 1. Open MxControlCe… --- ## [How to Define a Direct File Server Path in MxCC](https://community.mobotix.com/t/how-to-define-a-direct-file-server-path-in-mxcc/385)
**Author:** [@Mx-MichaelD](https://community.mobotix.com/u/Mx-MichaelD)\ **Replies:** 0\ **Last updated:** [May 25, 2018, 3:20am UTC](https://community.mobotix.com/t/how-to-define-a-direct-file-server-path-in-mxcc/385 "2018-05-25T03:20:28Z")
1. Introduction By default, playback and export of recordings in MxCC is “Via Camera”. This means that MxCC must request the recorded data from the camera, which in turn then accesses the recording from the file server.… --- ## [MxCC Leitfaden zur Fehlersuche](https://community.mobotix.com/t/mxcc-leitfaden-zur-fehlersuche/374)
**Author:** [@Mx-AlexW](https://community.mobotix.com/u/Mx-AlexW)\ **Replies:** 0\ **Last updated:** [May 23, 2018, 2:44pm UTC](https://community.mobotix.com/t/mxcc-leitfaden-zur-fehlersuche/374 "2018-05-23T14:44:55Z")
1. Einführung Dieses Dokument stellt die grundlegenden Schritte vor, um eine erste Fehlerdiagnose bei Problemen mit MxCC auszuführen. Falls es dazu kommen sollte, dass das Problem zum MOBOTIX Support eskaliert wird, sin… --- ## [How to read flash media (USB devices, SD cards) containing MX recordings with MxCC](https://community.mobotix.com/t/how-to-read-flash-media-usb-devices-sd-cards-containing-mx-recordings-with-mxcc/349)
**Author:** [@MatteoL](https://community.mobotix.com/u/MatteoL)\ **Replies:** 0\ **Last updated:** [May 15, 2018, 11:29am UTC](https://community.mobotix.com/t/how-to-read-flash-media-usb-devices-sd-cards-containing-mx-recordings-with-mxcc/349 "2018-05-15T11:29:44Z")
The latest version of MxControlCenter 2.5.4.5 allows for direct access of SD cards, USB sticks and USB hard drives written by MOBOTIX cameras with software version 4.3.4.83 or higher. MxCC 2.5.4.5 also supports the newe… --- ## [How to disable Privacy Mode?](https://community.mobotix.com/t/how-to-disable-privacy-mode/109)
**Author:** [@Mx-ThomasV](https://community.mobotix.com/u/Mx-ThomasV)\ **Replies:** 0\ **Last updated:** [March 22, 2018, 5:00pm UTC](https://community.mobotix.com/t/how-to-disable-privacy-mode/109 "2018-03-22T17:00:04Z")
The Privacy Mode allows you to lock access to the cameras and suspend recordings for a certain amount of time or till you want to restore the normal behavior of your system. This could be the case, for instance, when you…