# MOBOTIX 7 **URL:** https://community.mobotix.com/c/m7-mobotix-7/154.md [Latest](https://community.mobotix.com/latest.md) · [Categories](https://community.mobotix.com/categories.md) · [Tags](https://community.mobotix.com/tags.md) --- ## [About the MOBOTIX 7 category](https://community.mobotix.com/t/about-the-mobotix-7-category/5862)
**Author:** [@Mx-DirkG](https://community.mobotix.com/u/Mx-DirkG)\ **Replies:** 0
Anything about the MOBOTIX 7 lineup. Hardware, Firmware, Certified Apps. For information about Certified Apps, see here: --- ## [M73 FM Bundle: What ANSI/FM 3260 “Indoor” Classification Means for Projects](https://community.mobotix.com/t/m73-fm-bundle-what-ansi-fm-3260-indoor-classification-means-for-projects/10777)
**Author:** [@Mx-PhilippH](https://community.mobotix.com/u/Mx-PhilippH)\ **Replies:** 0\ **Last updated:** [October 22, 2026, 10:52am UTC](https://community.mobotix.com/t/m73-fm-bundle-what-ansi-fm-3260-indoor-classification-means-for-projects/10777 "2026-10-22T10:52:04Z")
Since July 2026, the MOBOTIX M73 FM Bundle has held ANSI/FM 3260 approval as a flame detector. The approval applies to operation in controlled indoor environments. If you know the M73 as a rugged outdoor camera, this may… --- ## [M73A - Resettaster J/N?](https://community.mobotix.com/t/m73a-resettaster-j-n/10561)
**Author:** [@IBC](https://community.mobotix.com/u/IBC)\ **Replies:** 2\ **Last updated:** [July 24, 2026, 11:40am UTC](https://community.mobotix.com/t/m73a-resettaster-j-n/10561 "2026-07-24T11:40:10Z")
Gibt es den “resettaster” an der M73 noch, oder nicht? Wir haben da widersprüchliche Aussagen und Grafiken… Mit freundlichen Grüßen Thomas Schreiber --- ## [Integration of Adam 6060 IO Module with Mobotix Camera](https://community.mobotix.com/t/integration-of-adam-6060-io-module-with-mobotix-camera/10056)
**Author:** [@MXDanielG](https://community.mobotix.com/u/MXDanielG)\ **Replies:** 0\ **Last updated:** [November 7, 2025, 10:01am UTC](https://community.mobotix.com/t/integration-of-adam-6060-io-module-with-mobotix-camera/10056 "2025-11-07T10:01:42Z")
There are several Ethernet IO Modules that have been tested with Mobotix Cameras. One such is the Advantech Adam 6060 with 6 digital inputs and 6 Relay outputs. This describes the setup of the Adam Module and the integra… --- ## [Using Direct NAS recording and sepearate RTSP stream for event detection](https://community.mobotix.com/t/using-direct-nas-recording-and-sepearate-rtsp-stream-for-event-detection/9703)
**Author:** [@ThanosGreece](https://community.mobotix.com/u/ThanosGreece)\ **Replies:** 0\ **Last updated:** [June 20, 2025, 10:00am UTC](https://community.mobotix.com/t/using-direct-nas-recording-and-sepearate-rtsp-stream-for-event-detection/9703 "2025-06-20T10:00:04Z")
Hello, My currently deployments consists of MxONE and V71 sensors. I love the direct NAS recording feature because offers de-centralisation, scalability and cost wise MxMC comes free. I found one AI paltform can integr… --- ## [Q71 Verschiedene Zugänge](https://community.mobotix.com/t/q71-verschiedene-zugange/9683)
**Author:** [@M.Fish](https://community.mobotix.com/u/M.Fish)\ **Replies:** 0\ **Last updated:** [June 12, 2025, 8:04am UTC](https://community.mobotix.com/t/q71-verschiedene-zugange/9683 "2025-06-12T08:04:56Z")
Hallo Zusammen, ich möchte eine Q71 Kamera für die Überwachung meiner Lagerfläche nutzen. In der Lagerfläche befindet sich auch mein Büro. Nun habe ich zwei Anforderungen: Wenn ein zugelassener Mitarbeiter die Daten … --- ## [C71 NurseAssist - Available filter values for NurseAssistAdvanced events](https://community.mobotix.com/t/c71-nurseassist-available-filter-values-for-nurseassistadvanced-events/8584)
**Author:** [@marcus](https://community.mobotix.com/u/marcus)\ **Replies:** 4\ **Last updated:** [May 28, 2025, 7:34am UTC](https://community.mobotix.com/t/c71-nurseassist-available-filter-values-for-nurseassistadvanced-events/8584 "2025-05-28T07:34:15Z")
Hi, I’ve configured the camera to send events to Skyresponse according to your community docs. It works great, but, what are the available filter values for the advanced events in NurseAssist? I’ve got the events work… --- ## [M73 Bildname extern vorgeben](https://community.mobotix.com/t/m73-bildname-extern-vorgeben/9653)
**Author:** [@tfe](https://community.mobotix.com/u/tfe)\ **Replies:** 0\ **Last updated:** [May 27, 2025, 1:02pm UTC](https://community.mobotix.com/t/m73-bildname-extern-vorgeben/9653 "2025-05-27T13:02:25Z")
Wir möchten Einzelbilder einer M73 speichern und dazu den Dateinamen extern vorgeben. Der Dateiname wird von einer Anlagensteuerung (SPS) generiert und könnte von dort z.B. via http übertragen werden. Die HTTP-API wird a… --- ## [Q71 - LED-Weißlicht statt IR](https://community.mobotix.com/t/q71-led-weisslicht-statt-ir/7404)
**Author:** [@PEES\_GmbH](https://community.mobotix.com/u/PEES_GmbH)\ **Replies:** 6\ **Last updated:** [February 18, 2025, 7:21am UTC](https://community.mobotix.com/t/q71-led-weisslicht-statt-ir/7404 "2025-02-18T07:21:03Z")
Guten Abend liebe Community, ich wäre für Eure Hilfe sehr dankbar. Es gelibgt mir nicht, statt der IR- Beleuchtung die bei der Q71 ebenfalls verbauten Weißlicht-LEDs zu nutzen, um in der Dunkelheit auch Farbbilder zu er… --- ## [C71 NurseAssist and OpenVPN](https://community.mobotix.com/t/c71-nurseassist-and-openvpn/8237)
**Author:** [@marcus](https://community.mobotix.com/u/marcus)\ **Replies:** 5\ **Last updated:** [January 17, 2025, 6:50am UTC](https://community.mobotix.com/t/c71-nurseassist-and-openvpn/8237 "2025-01-17T06:50:47Z")
Hi there, When doing some initial testing with a C71 with NurseAssist it seems as if though I’m not able to run the OpenVPN client as well. When rebooting the camera, OpenVPN works, but not NurseAssist. Disabling OpenVP… --- ## [Mx-410A Box input specifications](https://community.mobotix.com/t/mx-410a-box-input-specifications/9155)
**Author:** [@Alodine](https://community.mobotix.com/u/Alodine)\ **Replies:** 2\ **Last updated:** [January 3, 2025, 5:47pm UTC](https://community.mobotix.com/t/mx-410a-box-input-specifications/9155 "2025-01-03T17:47:28Z")
From the Mx-410A-Box Quick Installation manual, the four inputs are specified like this: "4 inputs for connecting sensors” and "Inputs 4 galvanically separated inputs (AC/DC, self-powered, up to 50 V)” Can someone tel… --- ## [S74 and 4k D080 lens](https://community.mobotix.com/t/s74-and-4k-d080-lens/7933)
**Author:** [@mqoh](https://community.mobotix.com/u/mqoh)\ **Replies:** 11\ **Last updated:** [October 25, 2024, 2:42pm UTC](https://community.mobotix.com/t/s74-and-4k-d080-lens/7933 "2024-10-25T14:42:14Z")
We have S74 cameras with 4k D080 lenses. We are trying to lower the resolution on the live view from 4k to 1080p, every time we set the general image settings to Full HD, it doesn’t hold and just goes back to Ultra HD. A… --- ## [S74 and External SSD issue](https://community.mobotix.com/t/s74-and-external-ssd-issue/9029)
**Author:** [@mqoh](https://community.mobotix.com/u/mqoh)\ **Replies:** 1\ **Last updated:** [October 25, 2024, 2:37pm UTC](https://community.mobotix.com/t/s74-and-external-ssd-issue/9029 "2024-10-25T14:37:30Z")
Hello, We have S74 units and are trying to add external storage to the units using Samsung Shield T7 4TB SSD. In the hardware expansion slots, I have tried enabling both USB SSD / Flash Device or USB External Harddisk b… --- ## [S74 m. Dualbildsensor: per RTSP und ONVIF gezielt bestimmten Sensor als Stream](https://community.mobotix.com/t/s74-m-dualbildsensor-per-rtsp-und-onvif-gezielt-bestimmten-sensor-als-stream/8889)
**Author:** [@Steja](https://community.mobotix.com/u/Steja)\ **Replies:** 0\ **Last updated:** [September 23, 2024, 4:45pm UTC](https://community.mobotix.com/t/s74-m-dualbildsensor-per-rtsp-und-onvif-gezielt-bestimmten-sensor-als-stream/8889 "2024-09-23T16:45:45Z")
Kamera S74 v8.0.0.94 Sensor M1 optical Sensor 4K DN040 Sensor M2 optical Sensor 4K DN40 Sensor M3 + M4 = IR Illuminator Wie kann ich gezielt und unabhängig voneinander bei den Integrationsprotokollen RTSP sowie alter… --- ## [S74 - Is it worth the upgrading from S16B?](https://community.mobotix.com/t/s74-is-it-worth-the-upgrading-from-s16b/8827)
**Author:** [@BenDair](https://community.mobotix.com/u/BenDair)\ **Replies:** 4\ **Last updated:** [September 7, 2024, 4:20pm UTC](https://community.mobotix.com/t/s74-is-it-worth-the-upgrading-from-s16b/8827 "2024-09-07T16:20:16Z")
I’d love to hear other’s experience with the S74 after using the S16B cameras. Do you think the benefit from the S74 was worth the time, costs, and advancements? If so, what were the benefits you found useful. If not, wh… --- ## [Open Network Brdige RTSP cannot use via ffmpeg.](https://community.mobotix.com/t/open-network-brdige-rtsp-cannot-use-via-ffmpeg/7867)
**Author:** [@Yingchu](https://community.mobotix.com/u/Yingchu)\ **Replies:** 1\ **Last updated:** [January 10, 2024, 8:47am UTC](https://community.mobotix.com/t/open-network-brdige-rtsp-cannot-use-via-ffmpeg/7867 "2024-01-10T08:47:11Z")
Hi there, We plan to use “open network bridge” rtsp of Mobotix on our product, by the following link: Then found it only can be used via vlc, but failed via ffmpeg. ffmpeg cannot handle 2 www-header Is there any … --- ## [Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2)](https://community.mobotix.com/t/cannot-open-tun-tap-dev-dev-net-tun-no-such-file-or-directory-errno-2/7780)
**Author:** [@TechTrain](https://community.mobotix.com/u/TechTrain)\ **Replies:** 0\ **Last updated:** [December 11, 2023, 7:00am UTC](https://community.mobotix.com/t/cannot-open-tun-tap-dev-dev-net-tun-no-such-file-or-directory-errno-2/7780 "2023-12-11T07:00:57Z")
What can cause the following error: Cannot open TUN/TAP dev /dev/net/tun: No such file or directory (errno=2)? --- ## [Apps for dual sensor people detection](https://community.mobotix.com/t/apps-for-dual-sensor-people-detection/7562)
**Author:** [@FrankOverIP](https://community.mobotix.com/u/FrankOverIP)\ **Replies:** 0\ **Last updated:** [November 7, 2023, 7:20am UTC](https://community.mobotix.com/t/apps-for-dual-sensor-people-detection/7562 "2023-11-07T07:20:51Z")
I have a S74 with two optical sensor modules and one IR module. The motion detection shows great problems with car headlights in the dark. Now I’m searching for an app which allows to use both sensor modules with AI obje… --- ## [S74 multiple sensor streams to Synology Surveillance Station](https://community.mobotix.com/t/s74-multiple-sensor-streams-to-synology-surveillance-station/7437)
**Author:** [@FrankOverIP](https://community.mobotix.com/u/FrankOverIP)\ **Replies:** 7\ **Last updated:** [October 12, 2023, 5:27pm UTC](https://community.mobotix.com/t/s74-multiple-sensor-streams-to-synology-surveillance-station/7437 "2023-10-12T17:27:04Z")
Hi, I just got a brand new S74 - my first Mobotix - and I’m struggling with getting separate streams from the two sensor modules. Meanwhile I read the following articles: Independent Dual Streams from Mobotix Cameras … --- ## [IR Cut Modul mit unterschiedlichen Belichtungszeiten Licht/Tageszeit](https://community.mobotix.com/t/ir-cut-modul-mit-unterschiedlichen-belichtungszeiten-licht-tageszeit/6620)
**Author:** [@naweko](https://community.mobotix.com/u/naweko)\ **Replies:** 0\ **Last updated:** [April 2, 2023, 11:42am UTC](https://community.mobotix.com/t/ir-cut-modul-mit-unterschiedlichen-belichtungszeiten-licht-tageszeit/6620 "2023-04-02T11:42:54Z")
Hallo, ich habe eine M73 mit einem IR Cut Sensormodul. Aufgrund der hiesigen Gegebenheiten ist eine optimale Ausleuchtung nur schwer möglich. Bei der vorherigen M16 konnte ich Tag- und Nachtsensor mit unterschiedlichen … --- ## [V71 and C71 - SD Card cover is stuck](https://community.mobotix.com/t/v71-and-c71-sd-card-cover-is-stuck/6478)
**Author:** [@bosko1333](https://community.mobotix.com/u/bosko1333)\ **Replies:** 1\ **Last updated:** [February 24, 2023, 9:35am UTC](https://community.mobotix.com/t/v71-and-c71-sd-card-cover-is-stuck/6478 "2023-02-24T09:35:42Z")
Hello! Could anyone explain to me why sometimes SD card cover on V71 / C71 become so hard to remove and is there a way to unstuck this cover? Even with help of the biggest coin which fits in the groove, the cover still… --- ## [Sending license plate recognition to the microservice](https://community.mobotix.com/t/sending-license-plate-recognition-to-the-microservice/4464)
**Author:** [@markob](https://community.mobotix.com/u/markob)\ **Replies:** 0\ **Last updated:** [October 5, 2021, 9:12am UTC](https://community.mobotix.com/t/sending-license-plate-recognition-to-the-microservice/4464 "2021-10-05T09:12:48Z")
Hello everyone, I’m trying to send the result of LPR in some format, for example JSON to microservice. Is there a possibility to do something similar? Thanks in advance. --- ## [Objektiv Mobotix M7](https://community.mobotix.com/t/objektiv-mobotix-m7/5559)
**Author:** [@Marjan](https://community.mobotix.com/u/Marjan)\ **Replies:** 1\ **Last updated:** [September 27, 2022, 10:58am UTC](https://community.mobotix.com/t/objektiv-mobotix-m7/5559 "2022-09-27T10:58:57Z")
Hallo zusammen, ich habe einige Frage zu den den neuen Mobotix 7 Objektiven: Ist es richtig, dass diese Objektive im Gegensatz zu den Vorgängern (z.B. Mx6) kein Mikrofon mehr integriert haben? Gibt es diese auch in ei… --- ## [Quick install Guides and Technical Specifications (EN)](https://community.mobotix.com/t/quick-install-guides-and-technical-specifications-en/5865)
**Author:** [@Mx-DirkG](https://community.mobotix.com/u/Mx-DirkG)\ **Replies:** 0\ **Last updated:** [September 27, 2022, 10:13am UTC](https://community.mobotix.com/t/quick-install-guides-and-technical-specifications-en/5865 "2022-09-27T10:13:09Z")
Quick Install Guides for all MOBOTIX 7 Models are available here: Technical Data Sheets can be viewed and downloaded here: --- ## [MOBOTIX 7 web presence](https://community.mobotix.com/t/mobotix-7-web-presence/5864)
**Author:** [@Mx-DirkG](https://community.mobotix.com/u/Mx-DirkG)\ **Replies:** 0\ **Last updated:** [September 27, 2022, 10:02am UTC](https://community.mobotix.com/t/mobotix-7-web-presence/5864 "2022-09-27T10:02:02Z")
All Information om MOBOTIX 7 and related products here: --- ## [M73 w/ Thermal 333R100 & Image Module](https://community.mobotix.com/t/m73-w-thermal-333r100-image-module/4949)
**Author:** [@mx-roland](https://community.mobotix.com/u/mx-roland)\ **Replies:** 0\ **Last updated:** [February 15, 2022, 8:09pm UTC](https://community.mobotix.com/t/m73-w-thermal-333r100-image-module/4949 "2022-02-15T20:09:42Z")
FYI. Just ran into issue with M73 and 336R100 Thermal Sensor with Mx-O-M7SA-8D100. IMG Sensor connected to Cable 1 Thermal Module connected to Cable 3 The thermal module was not detected. We found that disconnecting… --- ## [IR Modul bei Tag](https://community.mobotix.com/t/ir-modul-bei-tag/5255)
**Author:** [@G.matic](https://community.mobotix.com/u/G.matic)\ **Replies:** 4\ **Last updated:** [May 9, 2022, 12:46pm UTC](https://community.mobotix.com/t/ir-modul-bei-tag/5255 "2022-05-09T12:46:01Z")
Hallo, wie schalte ich zur Optimierung von Bildinformationen (z.B: Gesichter hinter der Frontscheibe eines Autos) bei Tag das IR Modul dauerhaft ein? Aktuell M73 mit D100 (rechts) und IR Modul (links) liefert leider nich… --- ## [Schedule IR-Cut Filter in Mobotix M73](https://community.mobotix.com/t/schedule-ir-cut-filter-in-mobotix-m73/5007)
**Author:** [@buddikamadushan](https://community.mobotix.com/u/buddikamadushan)\ **Replies:** 4\ **Last updated:** [February 25, 2022, 9:38am UTC](https://community.mobotix.com/t/schedule-ir-cut-filter-in-mobotix-m73/5007 "2022-02-25T09:38:08Z")
Hi every one how do we schedule IR-Cut Filter on and off time in mobotix M73 camera. --- ## [Q71 Mounting Options](https://community.mobotix.com/t/q71-mounting-options/4909)
**Author:** [@KMD606](https://community.mobotix.com/u/KMD606)\ **Replies:** 6\ **Last updated:** [February 7, 2022, 11:15am UTC](https://community.mobotix.com/t/q71-mounting-options/4909 "2022-02-07T11:15:54Z")
The Q71 has connectors on the base protruding out. How are we supposed to mount this camera to standard 1 Gang or 2 Gang back boxes? How are we supposed to mount this camera hanging on a pole? The wall mount bracket t… --- ## [Avaible Keywords for Vaxtor Apps](https://community.mobotix.com/t/avaible-keywords-for-vaxtor-apps/4568)
**Author:** [@MartinHollenwger](https://community.mobotix.com/u/MartinHollenwger)\ **Replies:** 6\ **Last updated:** [November 11, 2021, 7:24am UTC](https://community.mobotix.com/t/avaible-keywords-for-vaxtor-apps/4568 "2021-11-11T07:24:53Z")
Hi, I’m searching the available Keywords to send JSON PUSH messages to my server. Can somebody tell me where I can find the keywords? best regards Martin [Next page](https://community.mobotix.com/c/m7-mobotix-7/154.md?page=1)