# Adding Mobotix Move 20MP streams to MxMC

**URL:** <https://community.mobotix.com/t/adding-mobotix-move-20mp-streams-to-mxmc/9477>\
**Category:** ManagementCenter\
**Tags:** troubleshooting, howto, mxmc\
**Created:** [March 20, 2025, 4:03pm UTC](https://community.mobotix.com/t/adding-mobotix-move-20mp-streams-to-mxmc/9477 "2025-03-20T16:03:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mqoh](https://avatars.discourse-cdn.com/v4/letter/m/9de053/32.png) [@mqoh](https://community.mobotix.com/u/mqoh)\
**Post date:** [March 20, 2025, 4:03pm UTC](https://community.mobotix.com/t/adding-mobotix-move-20mp-streams-to-mxmc/9477/1 "2025-03-20T16:03:13Z")

</div>

Hello,

We have Mobotix Move MP20 quad view cameras. I am trying to add them to MxMC via the sites DNS and port forward. I’ve also tried via the direct site ip and port forward.

For example, I have tried as the URL: http://.com:5000/live/stream5 to get the quad view. I set stream 5 to mjpeg on the camera. Then in MxMC i have set the connection protocol to RTP via TCP, it sets it to MxHiQual and then i select encoder 5. It won’t come up. I use the http://.com:5000/live/stream5 and it works but when i try to add /live/stream1, i set it Profile1 and encoder1 for stream 1 and then it asks me to transfer the profiles and then bricks the quad view and stream1 won’t come up.

Also, I am only able to use my admin login and not the user login I setup, which I gave camera controller and listen settings.