# Alarm integration of c ONE / c71 NurseAssist in HPS ConnectedHealth

**URL:** <https://community.mobotix.com/t/alarm-integration-of-c-one-c71-nurseassist-in-hps-connectedhealth/7730>\
**Category:** Kepler NurseAssist\
**Tags:** howto, integration, nurseassist, nursecallsystem\
**Created:** [November 30, 2023, 2:40pm UTC](https://community.mobotix.com/t/alarm-integration-of-c-one-c71-nurseassist-in-hps-connectedhealth/7730 "2023-11-30T14:40:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mx-PhilippH](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.mobotix.com/mx-philipph/32/10382_2.png) [@Mx-PhilippH](https://community.mobotix.com/u/Mx-PhilippH)\
**Post date:** [November 30, 2023, 2:40pm UTC](https://community.mobotix.com/t/alarm-integration-of-c-one-c71-nurseassist-in-hps-connectedhealth/7730/1 "2023-11-30T14:40:09Z")

</div>

**- About HPS ConnectedHealth -**  
HPS ConnectedHealth is a vendor independent cloud-based care platform integrating with a variety of communication and home automation services.

**- Getting started -**  
The _c ONE and_ _c71 NurseAssist_ Sensors come with a configuration optimized for the use case and thus differ significantly from other MOBOTIX sensors by default.  
In order to integrate the alarms into ConnectedHealth, this configuration must be extended with customized IP Notify profiles and action groups, which convert the MxMessageSystem events created by the _NurseAssist app_ into compatible IP notification and address the alarm structure prepared in ConnectedHealth.

**- Create an IP Notify profile -**  
Go to _Admin Menu → Transfer Profiles → IP Notify Profiles_. Click on the button _Add new profile_.  
Fill in the fields as shown in the image below:

 ![grafik](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/7/77c13c194d004a4b3a05947d9e0240d99615b081.png)

**Caution:** Please adjust the ConnectedHealth _Destination Address_ accordingly.

Here is the content of the **message** box for easier copying:

```auto
{
  "uuid": $(MSG.LOCAL.KeplerNurseAssist.notification.uuid),
  "timestamp": $(MSG.LOCAL.KeplerNurseAssist.notification.timestamp),
  "type": $(MSG.LOCAL.KeplerNurseAssist.notification.notificationType),
  "stream": "$(ID.NAM)",
  "message": $(MSG.LOCAL.KeplerNurseAssist.notification.notificationType)
}

```

**- Testing the configuration -**  
You can test the IP Notify profile configuration by going to _Admin Menu → Network Setup → Test Current Network Configuration → IP Notify_. Choose the IP Notify Profile you configured above.

**- Activation of Kepler NurseAssist MxMessageSystem events -**  
Go to _Setup Menu → Event Control → Event Overview → Message Events_ and activate the pre-defined MxMessageSystem event profiles you want to use as an alarm trigger for ConnectedHealth. By default only the global Kepler NurseAssist MxMessageSystem event profile is activated.

**- Create an Action Group -**  
Go to _Setup Menu → Event Control → Action Group Overview_. Click on the button _Add new group_.

- Define a name for the action group profile
- Choose one of the pre-defined Kepler NurseAssist MxMessageSystem events in _Event Selection_
- Click on the button _Add new action_ and select the IP notify profile created according to the example above

 ![grafik](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/d/d587097885501726145aea76d6e325c3a997159d.png)
