# Alarm integration of c ONE / c71 NurseAssist in Skyresponse

**URL:** <https://community.mobotix.com/t/alarm-integration-of-c-one-c71-nurseassist-in-skyresponse/7906>\
**Category:** Kepler NurseAssist\
**Tags:** howto, integration, nurseassist, nursecallsystem\
**Created:** [January 9, 2024, 2:26pm UTC](https://community.mobotix.com/t/alarm-integration-of-c-one-c71-nurseassist-in-skyresponse/7906 "2024-01-09T14:26:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mx-PhilippH](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.mobotix.com/mx-philipph/32/10382_2.png) [@Mx-PhilippH](https://community.mobotix.com/u/Mx-PhilippH)\
**Post date:** [January 9, 2024, 2:26pm UTC](https://community.mobotix.com/t/alarm-integration-of-c-one-c71-nurseassist-in-skyresponse/7906/1 "2024-01-09T14:26:18Z")

</div>

**- About Skyresponse -**  
_Skyresponse_ is a software tech company offering a cloud-based SaaS alarm management platform integrating with a variety of sensor types to enable user-centric solutions among others in the areas of health and elderly care.

**- Getting started -**  
The _c ONE and_ _c71 NurseAssist_ Sensor come with a configuration optimized for the use case and thus differ significantly from other MOBOTIX sensors by default.  
In order to integrate the alarms into _Skyresponse_, this configuration must be extended with customized IP Notify profiles and action groups, which convert the MxMessageSystem events created by the _NurseAssist app_ into compatible IP notification and address the alarm structure prepared in _Skyresponse_.

**- Create a IP Notify Profile for every notification type -**  
Go to "Admin Menu → Transfer Profiles → IP Notify Profiles. Click on the button “Add New Profile” and fill in the fields as shown in the image below:

 ![grafik](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/4/41afa460365bfae9ba369e371df605d155848a9e.png)

The content of the message is:

```auto
{
"authentication": {
"identifier": "$(ID.NAM)",
"secret": "<token>",
"product": "KPLR"
},
"classifications": [
<classification-id>
],
"textMessage": "FallDetected",
"locations": [
{
"location": "$(ID.NAM)"
}
]
}

```

Repeat this procedure for every notification type, corresponding to every Action  
Group you created.

This is a mapping from the notification type to the Skyresponse alarm id (the list is  
not updated yet with some of the NurseAssist types):

| Type | Skyresponse ID |
| --- | --- |
| CAMERA\_UNREACHABLE\_DETECTION | 77431 |
| HALLWAY\_WANDER\_DETECTION | 77432 |
| IN\_BATHROOM\_DETECTION | 77425 |
| INTRUDER\_IN\_ROOM\_DETECTION | 77433 |
| MAN\_DOWN\_DETECTION | 77421 |
| MISSING\_BED\_DETECTION | 77426 |
| OUT\_OF\_BED\_DETECTION | 77423 |
| OUT\_OF\_ROOM\_DETECTION | 77424 |
| PERSON\_VISIBLE\_DETECTION | 77427 |
| PERSON\_GETTING\_UP\_FROM\_CHAIR\_DETECTION | 77428 |
| PERSON\_GETTING\_UP\_IN\_BED\_DETECTION | 77429 |
| SOEB\_DETECTION | 77422 |
| STAFF\_ENTERING\_ROOM\_DETECTION | 77430 |
| NO\_DETECTION | 77434 |
| IN\_BED\_DETECTION | 77434 |

**- Testing the configuration -**  
You can test the IP Notify Profile configuration by going to “Admin Menu → Network  
Setup → Test Current Network Configuration → IP Notify”. Choose the IP Notify  
Profile you configured above.