# App should be able to open my door, the door should be opened thenby executing a http request **URL:** \ **Category:** MOBOTIX Live\ **Tags:** doorstation\ **Created:** [May 26, 2021, 6:50pm UTC](https://community.mobotix.com/t/app-should-be-able-to-open-my-door-the-door-should-be-opened-thenby-executing-a-http-request/4039 "2021-05-26T18:50:13Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![baerdo](https://avatars.discourse-cdn.com/v4/letter/b/a4c791/32.png) [@baerdo](https://community.mobotix.com/u/baerdo)\ **Post date:** [May 26, 2021, 6:50pm UTC](https://community.mobotix.com/t/app-should-be-able-to-open-my-door-the-door-should-be-opened-thenby-executing-a-http-request/4039/1 "2021-05-26T18:50:13Z")
How can I configure the action which should be executed when the user presses the door opening function in the app? My door can be opened by a remote http call. I have no hardware connected to open the door. I have a soft button “Open Door” where I have configured an IP Notify Profile to be executed which works fine. ---
**Author:** ![ub99](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.mobotix.com/ub99/32/10283_2.png) [@ub99](https://community.mobotix.com/u/ub99)\ **Post date:** [May 30, 2021, 4:46pm UTC](https://community.mobotix.com/t/app-should-be-able-to-open-my-door-the-door-should-be-opened-thenby-executing-a-http-request/4039/2 "2021-05-30T16:46:10Z")
Hi, due to the fact that T26 has no physical switching-output, this needs to be „faked“. Only then you will have the virtual switching-output „door“ available (to be used with network commands). For the „fake“ you need to activate MX-232-IO-Box USB (you don‘t need to have this box physically). Next you need to associate one of the outputs of this fake MX-232-IO-Box USB with the door opening function. Finally you need a trigger event to be configured for door opening. Thats basically it, maybe the Mobotix guys here have a more detailed how-to with some screenshots, but this should point you in the right direction