# Enabling and Disabling the Speakers & Microphones via HTTP API **URL:** \ **Category:** Knowledge Base EN\ **Tags:** api, audio, speaker, microphone\ **Created:** [June 22, 2020, 2:45pm UTC](https://community.mobotix.com/t/enabling-and-disabling-the-speakers-microphones-via-http-api/2775 "2020-06-22T14:45:23Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Mx-MichaelD](https://avatars.discourse-cdn.com/v4/letter/m/f14d63/32.png) [@Mx-MichaelD](https://community.mobotix.com/u/Mx-MichaelD)\ **Post date:** [June 22, 2020, 2:45pm UTC](https://community.mobotix.com/t/enabling-and-disabling-the-speakers-microphones-via-http-api/2775/1 "2020-06-22T14:45:23Z")
**To enabling and disabling the Speakers & Microphones via HTTP API:** `/admin/audio?AUDIO_IN=0&save_config` _(Disable Mircophone)_ `/admin/audio?AUDIO_IN=2&save_config`_(Enable Microphone)_ `/admin/audio?SPEAKER=0&save_config` _(Disable Speaker)_ `/admin/audio?SPEAKER=2&save_config` _(Enable Speaker)_ `/admin/audio?AUDIO_IN=0&SPEAKER=0&save_config`_(Disable both Speaker and Microphone)_ The list below gives the numerical values you can use within this API command, depending on what you need to enable **SPEAKER** 0 = off 2 = internal speaker (on S14/15/16 internal line out) 3 = ExtIO/CamIO speaker 5 = ExtIO line out **MICRO** 0 = off 2 = internal microphone 3 = ExtIO microphone 5 = ExtIO line in 6 = microphone cam 0 (S14/15/16) 7 = microphone cam 1 8 = microphones of both cams 9 = line in S14/15 board ---
**Author:** ![mcamara](https://avatars.discourse-cdn.com/v4/letter/m/ee7513/32.png) [@mcamara](https://community.mobotix.com/u/mcamara)\ **Post date:** [October 19, 2020, 1:11pm UTC](https://community.mobotix.com/t/enabling-and-disabling-the-speakers-microphones-via-http-api/2775/2 "2020-10-19T13:11:06Z")
Hello Michael, I am trying to enable/disable the microphone through the API command, and following your tips above, I only get the error message: “408 Request Timeout Please reload the form without submitting CGI parameters.” I am using a Google Chrome browser and a T26 running firmware 5.4.0.44 to test this. Regards, Miguel Câmara