# Firmware download - old versions

**URL:** <https://community.mobotix.com/t/firmware-download-old-versions/3401>\
**Category:** Administration\
**Tags:** howto\
**Created:** [December 2, 2020, 9:46am UTC](https://community.mobotix.com/t/firmware-download-old-versions/3401 "2020-12-02T09:46:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![lepere](https://avatars.discourse-cdn.com/v4/letter/l/ea666f/32.png) [@lepere](https://community.mobotix.com/u/lepere)\
**Post date:** [December 2, 2020, 9:46am UTC](https://community.mobotix.com/t/firmware-download-old-versions/3401/1 "2020-12-02T09:46:23Z")

</div>

Hy all,  
I need to downgrade a Mobotix camera firmware (M12) in order to integrate into Genetec sotfware.

As far as I can see on Mobotix website, there is no possibility to download other firmware than the last one.

It could be nice if all firmware version were available to download.  
I Think I’am not the only one in the case for all Mobotix cameras.

Regards.  
Thierry.

---

<div class="post-metadata">

**Author:** ![Mx-MichaelS](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.mobotix.com/mx-michaels/32/919_2.png) [@Mx-MichaelS](https://community.mobotix.com/u/Mx-MichaelS)\
**Post date:** [December 2, 2020, 11:19am UTC](https://community.mobotix.com/t/firmware-download-old-versions/3401/2 "2020-12-02T11:19:07Z")

</div>

@lepere older Firmware versions can be found in our [Archive](https://www.mobotix.com/de/support/download-center/software-downloads-archiv) section.

---

<div class="post-metadata">

**Author:** ![lepere](https://avatars.discourse-cdn.com/v4/letter/l/ea666f/32.png) [@lepere](https://community.mobotix.com/u/lepere)\
**Post date:** [December 2, 2020, 12:05pm UTC](https://community.mobotix.com/t/firmware-download-old-versions/3401/3 "2020-12-02T12:05:21Z")

</div>

Tks for your rapid answer.  
Have a nice day.  
Regards.

---

<div class="post-metadata">

**Author:** ![bchetelat](https://avatars.discourse-cdn.com/v4/letter/b/e9a140/32.png) [@bchetelat](https://community.mobotix.com/u/bchetelat)\
**Post date:** [September 9, 2021, 1:01pm UTC](https://community.mobotix.com/t/firmware-download-old-versions/3401/4 "2021-09-09T13:01:00Z")

</div>

Lepere,  
Were you in fact able to get our M12 to work with Genetec? May I ask which CODEC you were successful with? Is there anything else you’d like to comment on regarding the M12 and Genetec?  
Thank you, Brian