# \[How To\] Accumulated Difference of Counting Corridors

**URL:** https://community.mobotix.com/t/how-to-accumulated-difference-of-counting-corridors/2725
**Category:** Knowledge Base EN
**Tags:** gettingstarted, mxanalytics, howto, accumulateddifferenc
**Created:** [June 12, 2020, 9:14am UTC](https://community.mobotix.com/t/how-to-accumulated-difference-of-counting-corridors/2725 "2020-06-12T09:14:50Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Mx-MichaelS](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.mobotix.com/mx-michaels/32/919_2.png) [@Mx-MichaelS](https://community.mobotix.com/u/Mx-MichaelS)
#### Post date: [June 12, 2020, 9:14am UTC](https://community.mobotix.com/t/how-to-accumulated-difference-of-counting-corridors/2725/1 "2020-06-12T09:14:50Z")

</div>

Since the firmware version 5.2.6.2 of the x16 x26 cameras, it is possible to show the difference of counting corridors.

[This option is also available in MxMc version 2.3.1](https://community.mobotix.com/t/how-to-customer-counter-in-managementcenter/2727)

> **Analytics must be activated and the Counting Corridors properly configured. With the arrows pointing to the direction that should be counted as entrance.**

To set it up go in the Setup Menu–\>Accumulated Difference Setting and Remote Camera Profiles

- **Limit:** Maximum number of persons allowed in.
- **Offset:** Here you can correct the number of people to match the actual number you have in the room.
- **’above’ MxMessage:** Here you can set the message name that will be sent, when the maximum number of allowed persons is reached.
- **’below’ MxMessage:** Here you can set the message name that will be sent, when number of persons is below the limit again.
- **Window Title:** Set text used for window title.
- **Warning Text:** Set text presented if limit is reached.

 ![Capture](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/8/8b108918ea139303e86d05b660da5931ce29bed5.jpeg)

You can also get the count corridor data from other cameras and use them to display a total number throw a single camera.

All you have to do is enter a Profile Name and the Camera data (IP/ Username/ Password)

 ![Capture2](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/f/f28b52481e4440d30427f29fe144cd12fe428a99.jpeg)

To view the difference of counting corridors you have to do the following.  
Setup Menu–\> Accumulated Difference of Counting Corridors

That will open a new window where the number counted will be displayed.

If the limit is not exceeded you will get a green background and the number of people currently inside.

 ![Capture3](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/e/e4387384950304c683af74ec52630bb8a9dced52.jpeg)

If you are over the limit the background color will change to red and show you again the total number of people inside.

 ![Capture4](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/c/cf09f4cf37a15c1b016cbc0021a68306349dc284.jpeg)

The Accumulated Difference of Counting Corridors can be also opened with this direct link:  
[http://ip-adresse/control/stat\_export?inside\_count](http://ip-adresse/control/stat_export?inside_count)