# How to enable Onvif Integration Protocol Mobotix Q26

**URL:** <https://community.mobotix.com/t/how-to-enable-onvif-integration-protocol-mobotix-q26/5014>\
**Category:** Software Integration\
**Tags:** troubleshooting, howto, onvif\
**Created:** [February 23, 2022, 10:40am UTC](https://community.mobotix.com/t/how-to-enable-onvif-integration-protocol-mobotix-q26/5014 "2022-02-23T10:40:39Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Irisbeqiri](https://avatars.discourse-cdn.com/v4/letter/i/c0e974/32.png) [@Irisbeqiri](https://community.mobotix.com/u/Irisbeqiri)\
**Post date:** [February 23, 2022, 10:40am UTC](https://community.mobotix.com/t/how-to-enable-onvif-integration-protocol-mobotix-q26/5014/1 "2022-02-23T10:40:39Z")

</div>

Hello Everyone, I need to add some Mobotix Q26 to a third party NVR.  
They have an old Firmware I think and I am trying but no feedback, when turning ONVIF ON it does not give the possibility to add an account for Onvif.  
Please can anyone help to find a new Firmware for Q26 and how to enable onvif.

| Product Type: | MOBOTIX Q26 |
| --- | --- |
| Serial Number: | **10.22.12.142** |
| Ethernet Hardware Address: | 00:03:C5:16:0C:8E |
| Factory IP Address: | 10.22.12.142 |
| Camera Code: | **160C8E** |
| Hardware | |
| Board Revision: | 6.2 |
| Processor Type: | ARMv7 Processor |
| Bootloader: | 8.0.0.0 |
| Operating System | |
| Type: | Linux |
| Release: | 4.6.0-rc5+ |
| Release Date: | #1 Wed Apr 12 09:08:43 CEST 2017 |
| File System | |
| Release: | MX-V5.0.0.127 |
| Creation Date: | 2017-04-27 16:08:35 CEST |
| Initial Size: | 61112 KB |
| ActiveX Version: | 1.8.8.0 |

---

<div class="post-metadata">

**Author:** ![MX-AngelC](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MX-AngelC](https://community.mobotix.com/u/MX-AngelC)\
**Post date:** [February 23, 2022, 3:50pm UTC](https://community.mobotix.com/t/how-to-enable-onvif-integration-protocol-mobotix-q26/5014/2 "2022-02-23T15:50:33Z")

</div>

Please follow this link for our newest Q26 Firmware.  
[Q26 Firmware](https://www.mobotix.com/sites/default/files/2022-01/release-notes_V5.4.6.6_EN_v1.html)

---

<div class="post-metadata">

**Author:** ![Irisbeqiri](https://avatars.discourse-cdn.com/v4/letter/i/c0e974/32.png) [@Irisbeqiri](https://community.mobotix.com/u/Irisbeqiri)\
**Post date:** [February 26, 2022, 8:37am UTC](https://community.mobotix.com/t/how-to-enable-onvif-integration-protocol-mobotix-q26/5014/3 "2022-02-26T08:37:17Z")

</div>

Hi Angel,  
Thank you for your support.  
I have updated the Q26 camera to newest software but when enable ONVIF it does not shows the abbility to change “ONVIF profiles” .  
Can you please help me where to change ONVIF to H264 and to change the frames?

Best regards

---

<div class="post-metadata">

**Author:** ![MX-AngelC](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@MX-AngelC](https://community.mobotix.com/u/MX-AngelC)\
**Post date:** [February 28, 2022, 4:27pm UTC](https://community.mobotix.com/t/how-to-enable-onvif-integration-protocol-mobotix-q26/5014/4 "2022-02-28T16:27:09Z")

</div>

going into the admin menu -\>camera admin-\>integrations protocols and change it to Onvif.

Make sure to change the username and password to be able to add them.