# How to properly configure ONVIF/RTSP on MOBOTIX v26B-6D?

**URL:** <https://community.mobotix.com/t/how-to-properly-configure-onvif-rtsp-on-mobotix-v26b-6d/9625>\
**Category:** Camera Software\
**Tags:** onvif, rtsp\
**Created:** [May 15, 2025, 2:07pm UTC](https://community.mobotix.com/t/how-to-properly-configure-onvif-rtsp-on-mobotix-v26b-6d/9625 "2025-05-15T14:07:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![VincasD](https://avatars.discourse-cdn.com/v4/letter/v/87869e/32.png) [@VincasD](https://community.mobotix.com/u/VincasD)\
**Post date:** [May 15, 2025, 2:07pm UTC](https://community.mobotix.com/t/how-to-properly-configure-onvif-rtsp-on-mobotix-v26b-6d/9625/1 "2025-05-15T14:07:44Z")

</div>

Hi,

Our camera:

```auto
Camera Identifier
Product Type: MOBOTIX v26B-6D
Serial Number: 10.26.54.132
Ethernet Hardware Address: 00:03:C5:1A:36:84
Factory IP Address: 10.26.54.132
Camera Code: 1A3684
Hardware
Board Revision: 6.4
Processor Type: ARMv7 Processor
Bootloader: 8.0.0.0
Operating System
Type: Linux
Release: 4.6.0-rc5+
Release Date: #1 SMP Thu Feb 15 16:55:40 CET 2024
File System
Release: MX-V5.4.9.9-r1
Creation Date: 2024-10-22 09:49:44 UTC
Initial Size: 77564 KB
ActiveX Version: 1.8.8.0 

```

( I believe firmware is the latest one? )

In `General Image Settings` I have set to 6MP option, but via first ONVIF Media Profile `/stream/onvif-default0` I get only some strange resolution `1280x848`. Also, ONVIF declares it’s `30fps`, but in reality I barely get 3fps (output from gst-launch-1.0) via RTSP stream:

```auto
/GstPipeline:pipeline0/GstFPSDisplaySink:fpsdisplaysink0: last-message = rendered: 8, dropped: 0, current: 2.40, average: 2.47

```

I did tried to go to `Integration Protocols` and reset Onvif to factory, and `Reset profiles`, but nothing helps.

One time I (somehow) managed to get `1920x1080` via Onvif, but it still failed to reached declared 30fps (not sure why it declares 30fps via ONVIF media profile, as it was set to 20 or 25 max). It was running barely on ~14fps.

I really need that 6MP with at least 15-20FPS via ONVIF default first profile. Is that doable?

Thanks!

---

<div class="post-metadata">

**Author:** ![VincasD](https://avatars.discourse-cdn.com/v4/letter/v/87869e/32.png) [@VincasD](https://community.mobotix.com/u/VincasD)\
**Post date:** [May 16, 2025, 6:39am UTC](https://community.mobotix.com/t/how-to-properly-configure-onvif-rtsp-on-mobotix-v26b-6d/9625/2 "2025-05-16T06:39:07Z")

</div>

One camera has declared video encoder to use “HD” resolution via RTSP:

```auto
"video" : {
      "venc0" : {
         "codec" : 2,
         "codec_profile" : 0,
         "enable" : true,
         "fps10" : 300,
         "gop_size" : 30,
         "multicast" : {
            "enable" : false,
            "ip" : "0.0.0.0",
            "port" : 0,
            "ttl" : 1
         },
         "quality" : 75,
         "quality_min" : 35,
         "rate_control" : 1,
         "resolution" : "HD",
         "target_bitrate" : 6000
      },

```

While another similar camera has “FullHD” defined:

```auto
"video" : {
      "venc0" : {
         "codec" : 2,
         "codec_profile" : 0,
         "enable" : true,
         "fps10" : 300,
         "gop_size" : 30,
         "multicast" : {
            "enable" : false,
            "ip" : "0.0.0.0",
            "port" : 0,
            "ttl" : 1
         },
         "quality" : 75,
         "quality_min" : 35,
         "rate_control" : 1,
         "resolution" : "FullHD",
         "target_bitrate" : 6000
      },

```

So, where do I change these resolutions? Can I set “6MP”?

---

<div class="post-metadata">

**Author:** ![VincasD](https://avatars.discourse-cdn.com/v4/letter/v/87869e/32.png) [@VincasD](https://community.mobotix.com/u/VincasD)\
**Post date:** [May 21, 2025, 8:24am UTC](https://community.mobotix.com/t/how-to-properly-configure-onvif-rtsp-on-mobotix-v26b-6d/9625/3 "2025-05-21T08:24:13Z")

</div>

I’ve tried to download configuration file, edit `rtpserver.json` secion, changed `"HD"` into `"FullHD"`, uploaded configuration file back to the camera, stored, rebooted, still got `"HD"` ☹ .

As if something does not allow upgrading rtsp resolution.