# Introducing the SEDi Pan/Tilt Unit PT5 for MOBOTIX cameras

**URL:** <https://community.mobotix.com/t/introducing-the-sedi-pan-tilt-unit-pt5-for-mobotix-cameras/1796>\
**Category:** Knowledge Base EN\
**Tags:** mxmc, pelcod\
**Created:** [October 22, 2019, 1:48pm UTC](https://community.mobotix.com/t/introducing-the-sedi-pan-tilt-unit-pt5-for-mobotix-cameras/1796 "2019-10-22T13:48:54Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mx-DirkG](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.mobotix.com/mx-dirkg/32/1343_2.png) [@Mx-DirkG](https://community.mobotix.com/u/Mx-DirkG)\
**Post date:** [October 22, 2019, 1:48pm UTC](https://community.mobotix.com/t/introducing-the-sedi-pan-tilt-unit-pt5-for-mobotix-cameras/1796/1 "2019-10-22T13:48:54Z")

</div>

MOBOTIX partner SEDi ([info@sedi-deutschland.de](mailto:info@sedi-deutschland.de) , [http://sedi-deutschland.de/](http://sedi-deutschland.de/)) produces and distributes a hardware P/T unit with PelcoD protocol fully integrated into ManagementCenter version 2.1.1 or later, the “PT5”.  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/b/b125c82b132d052533b7887c4dc9bfe609a65b3e.png) ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/e/e4d737cd1c3910ef8940aa51ab021341a746b091.jpeg)  
Find the installation manual here:  
[Manual PT5 english PoE V1.7 D-S.pdf](https://community.mobotix.com/uploads/short-url/g5OV3iS5zTkTCJ6kpnDXnFt6P5X.pdf) (3.7 MB)

The pin layout on the unit needs to be adapted to the use case:

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/6/60e8dbdcea8f312b002aebafa10b20a2fab62c16.jpeg)

![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/b/b4aa81235acf92babd2104c44f7180c0b6ea93ab.jpeg)

**MxCC**  
„PT4-Setting“  
Supported Cameras: All MXCameras  
with USB (every Firmware)  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/c/c954955d82fd1c87b3bd134254884b296d44d566.png) ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/4/464238aa1bf734aaad424203e4c3539a62a2d55a.png)  
**MxMC**  
(Version 2.1.1 and above)  
(and MxCC (Pelco-D Setting))  
Supported Cameras: Mx6  
(Firmware V5.2.4.15 and higher)  
Mx5 (Firmware V4.7.2.34 and higher  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/0/0795e479494a514a18908fc06290a06b22ffb0c0.png) ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/3/37e64e37753ddceb86a66b98416352f75560f835.png)

This is how to setup ManagementCenter to use the PT5:

1. Open the camera Configuration in MC  

2. Change „Connection Protocol“ from „MOBOTIX“ to „MOBOTIX with PelcoD“  

3. Restart MxManagmentCenter

4. Click and hold the left mouse-button for at least 3 seconds on the „Plus-Symbol“  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/c/cda27a631bf01240cc317e5df212e03ac1649278.jpeg)

5. A crosshair will appear in the upper left corner.  

Download as pdf:  
[PT5-MxMC Configuration\_1.pdf](https://community.mobotix.com/uploads/short-url/gvl3d1x2bYtevDkW9oTfS0kLl4c.pdf) (1.6 MB)

Data sheet:  
[SEDI PT5 Data sheet - 18-19.pdf](https://community.mobotix.com/uploads/short-url/wbX2YjYqkljk8lzynXCA1xlyqw1.pdf) (637.5 KB)

Declaration of Conformity:  
[Declaration of Conformity PT5.pdf](https://community.mobotix.com/uploads/short-url/gWD5M6tvCSGwblp5mdZVuP8fqy3.pdf) (573.0 KB)