# Motion detection on 304+ Bridge

**URL:** <https://community.mobotix.com/t/motion-detection-on-304-bridge/9499>\
**Category:** MOBOTIX CLOUD - Discussion\
**Created:** [March 30, 2025, 9:32pm UTC](https://community.mobotix.com/t/motion-detection-on-304-bridge/9499 "2025-03-30T21:32:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alodine](https://avatars.discourse-cdn.com/v4/letter/a/35a633/32.png) [@Alodine](https://community.mobotix.com/u/Alodine)\
**Post date:** [March 30, 2025, 9:32pm UTC](https://community.mobotix.com/t/motion-detection-on-304-bridge/9499/1 "2025-03-30T21:32:14Z")

</div>

I see a different screen for the camera motion control than what is described in the Mobotix Cloud 304+ Bridge manual (page 40).

In the manual, you create a region and set its motion parameters. If you want this region excluded from any motion event, you check the “Disable Motion” box.

There is no “Disable Motion” box on my display.

Is the current thinking that I just set the sensitivity for this region to zero?

Or is there a newer manual for the 304 bridge that I have not seen?