# Plug-in for Salto Systems - isystems Plug-in for integration with MOBOTIX HUB Access - EN

**URL:** <https://community.mobotix.com/t/plug-in-for-salto-systems-isystems-plug-in-for-integration-with-mobotix-hub-access-en/7608>\
**Category:** MOBOTIX HUB - Partner Plug In´s\
**Tags:** hub, access-control, salto, isystems\
**Created:** [November 14, 2023, 7:11am UTC](https://community.mobotix.com/t/plug-in-for-salto-systems-isystems-plug-in-for-integration-with-mobotix-hub-access-en/7608 "2023-11-14T07:11:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mx-SamuelS](https://avatars.discourse-cdn.com/v4/letter/m/f475e1/32.png) [@Mx-SamuelS](https://community.mobotix.com/u/Mx-SamuelS)\
**Post date:** [November 14, 2023, 7:11am UTC](https://community.mobotix.com/t/plug-in-for-salto-systems-isystems-plug-in-for-integration-with-mobotix-hub-access-en/7608/1 "2023-11-14T07:11:27Z")

</div>

## Plug-in for Salto Systems - isystems Plug-in for integration with MOBOTIX HUB Access

isystems’ plug-in allows the integration of Salto Systems’ Access Control functionalities into MOBOTIX HUB.  
It enables to control both systems (Video Surveillance and Access Control) through a single operational interface, namely the MOBOTIX HUB Desk Client.  
As opposed to operating two systems separately, cameras can be associated with ports, and automatic rules can be defined.  
The plug-in can be installed in large systems (with hundreds of units - cameras and doors) and also in small systems (with a few units).

## Key features

- Access to Salto Systems information (doors, door states, cardholders, events..) through MOBOTIX HUB Access.
- Issuing door commands (open, close) to Salto Systems via MOBOTIX HUB Access.
- Reception of the Salto Systems event stream in MOBOTIX HUB Desk Client.
- Through the MOBOTIX HUB Management interface, registered MOBOTIX cameras are associated with Salto Systems doors.
- Set of automatic rules according to parameters (event type, occurrence port, time lapse) and action to be performed (closed door, problem alert…).

## What is needed to use the plug-in?

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/6/69019444d192a53c961565225107915e4c6ba3f2.png)  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/9/9c0e3d6f43f8d322a954713b34fbf994d26a1ee8.png)  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/1/126300b34744eee78532383b6c47b21a505ad689.png)  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/9/9c0e3d6f43f8d322a954713b34fbf994d26a1ee8.png)  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/f/f97c303e1d74928daf8cfe5e908332a16ca5ad67.png)

## How it works:

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/1/10a2c123dcd0e481f7c4d3dc78ab6fe16db8cf7b.png)  
Management client: how to collect data from Salto, how to associate cameras to doors and how to define access control as actions  
 ![isystemsdoorevent](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/1/1ae5a0e922cfed3fe9b16cf788e07f54e3806c0c.png)

Operation: a door opening event; possibility to reproduce the images associated with the event.

 ![isystemsaccesscontrol](https://canada1.discourse-cdn.com/flex030/uploads/mobotix/original/2X/6/6e34c4efd8317a15c427d40a3ece78d59802d87b.jpeg)  
Operation: An access control event, access request (not allowed), all inside of MOBOTIX HUB.