# Possible Bug with MX-System Release 5.4.0.44( #1)

**URL:** <https://community.mobotix.com/t/possible-bug-with-mx-system-release-5-4-0-44-1/3190>\
**Category:** Image Settings\
**Created:** [October 7, 2020, 3:24am UTC](https://community.mobotix.com/t/possible-bug-with-mx-system-release-5-4-0-44-1/3190 "2020-10-07T03:24:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![BenDair](https://avatars.discourse-cdn.com/v4/letter/b/5e9695/32.png) [@BenDair](https://community.mobotix.com/u/BenDair)\
**Post date:** [October 7, 2020, 3:24am UTC](https://community.mobotix.com/t/possible-bug-with-mx-system-release-5-4-0-44-1/3190/1 "2020-10-07T03:24:56Z")

</div>

Cameras observed: S16D and D16

On these two cameras, I have “Linked Image Control” checked in the Exposure Settings. After a reboot, the exposure settings change to some unknown value. If I try to make any changes in the Exposure Settings Attributes, there appears to be NO effect.

My temporary fix was to:

1. uncheck the “Linked Image Control” checkbox
2. click “Set”  
3 recheck(check) the “Linked Image Control” checkbox  
4 click “Set”

After these steps, the “Linked Image Control” works again. But, after a reboot, I will need to do the process over.

Anyone else have this issue??

---

<div class="post-metadata">

**Author:** ![Mx-MaikC](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.mobotix.com/mx-maikc/32/1179_2.png) [@Mx-MaikC](https://community.mobotix.com/u/Mx-MaikC)\
**Post date:** [October 7, 2020, 11:38am UTC](https://community.mobotix.com/t/possible-bug-with-mx-system-release-5-4-0-44-1/3190/2 "2020-10-07T11:38:01Z")

</div>

Hello @BenDair,

I can reproduce this behaviour.

In this case please contact our international support, so that this issue can be checked further.  
[support-intl@mobotix.com](mailto:support-intl@mobotix.com)

---

<div class="post-metadata">

**Author:** ![BenDair](https://avatars.discourse-cdn.com/v4/letter/b/5e9695/32.png) [@BenDair](https://community.mobotix.com/u/BenDair)\
**Post date:** [December 13, 2020, 5:00am UTC](https://community.mobotix.com/t/possible-bug-with-mx-system-release-5-4-0-44-1/3190/3 "2020-12-13T05:00:57Z")

</div>

Just an FYI. I’ve also experienced this same issue with an S15D camera using the latest firmware.
