# System Messages

**URL:** <https://community.mobotix.com/t/system-messages/943>\
**Category:** Administration\
**Created:** [February 15, 2019, 4:13am UTC](https://community.mobotix.com/t/system-messages/943 "2019-02-15T04:13:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![BenDair](https://avatars.discourse-cdn.com/v4/letter/b/5e9695/32.png) [@BenDair](https://community.mobotix.com/u/BenDair)\
**Post date:** [February 15, 2019, 4:13am UTC](https://community.mobotix.com/t/system-messages/943/1 "2019-02-15T04:13:00Z")

</div>

Camera S16B - Dual -Has latest firmware

According to the release notes for MX-V5.2.1.4  
_## Bugfixes_

**\* Wrong system messages**  
**The `Transfer of image files delayed more than 60 seconds!` message erroneously appeared in the system messages and triggered false alarms of the store failure detection, if it had been configured.**

I still get these in system messages. I also get the storage emails. And I mainly get them when the illumination is low (i.e., at night). I also get them on x5 models. Also mainly at night. If I have an ipnotify that is triggered fairly often (like every 5 minutes. The events are triggered by illumination), I get even more messages. But again, mainly at night. I did cut down the ip notify’s being triggered as an experiment. And it has reduced down the amount of messages by a huge amount. Is there still a bug in the camera software?

EDIT  
I am not ruling out that it is a network problem on my end. I’ve spent a lot of time trying to diagnose my network before posting. But, there there are so many variables and I have only so many brain cells to deal with them.

EDIT #2  
Forgot to mention I am using Storage in MxFFS Archive With SD Card as a Fallback Buffer

---

<div class="post-metadata">

**Author:** ![BenDair](https://avatars.discourse-cdn.com/v4/letter/b/5e9695/32.png) [@BenDair](https://community.mobotix.com/u/BenDair)\
**Post date:** [February 15, 2019, 5:53am UTC](https://community.mobotix.com/t/system-messages/943/2 "2019-02-15T05:53:11Z")

</div>

Some new info. Since reducing events that produce frequent ipnotify on all my cameras, I have an M15 camera where reducing ipnotify has not reduced the amount of storage messages and emails (especially at night). I am thinking maybe because of this setting: “camera=auto”? Is the auto mode actually running an internal notify type program in the background?

I hope I am making sense. I’m not sure I even understand myself.