# Upgrade camera D25 to Door Bell T25

**URL:** <https://community.mobotix.com/t/upgrade-camera-d25-to-door-bell-t25/2482>\
**Category:** Door Station - Discussion\
**Created:** [April 18, 2020, 4:39pm UTC](https://community.mobotix.com/t/upgrade-camera-d25-to-door-bell-t25/2482 "2020-04-18T16:39:38Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Mx-MaikC](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.mobotix.com/mx-maikc/32/1179_2.png) [@Mx-MaikC](https://community.mobotix.com/u/Mx-MaikC)\
**Post date:** [April 20, 2020, 9:08am UTC](https://community.mobotix.com/t/upgrade-camera-d25-to-door-bell-t25/2482/4 "2020-04-20T09:08:41Z")

</div>

Hallo,

das Menü kann man nicht bei einer Nicht-Türstationskamera aktivieren.  
Hier müssten Sie wie in folgendem Artikel beschrieben vorgehen.

> [@Application Tutorial --\> Configure an Output Box and a Keypad](https://community.mobotix.com/t/application-tutorial-configure-an-output-box-and-a-keypad/2251):
>
> Configure an Output Box and a Keypad This tutorial explains the step by step configuration of the application below : Connecting a door, gate, window and garage door to an Output Box and open/ close them by pressing a PIN code in a Keypad and/or through MxManagementCenter. [Mx\_AT\_Door\_Window\_Out\_Keypad\_en\_180626.pdf](https://community.mobotix.com/uploads/short-url/aKStodbnjJb5HmTj58d5VpxoznW.pdf) (3.6 MB)

---

_[View the full topic](https://community.mobotix.com/t/upgrade-camera-d25-to-door-bell-t25/2482)._