Set up email notifications/alerts to send from M73 cams

[Mx-JoergS]

Hello Mathew,

the embedded camera online Manual of the camera contains the relevant informations in detail, please have a look:

In the Index Search by searching under “E” you will find the required details:

In short:

1. Activate the General Armin in Setup → General Arming
   
   
2. Define your Thermal Event in Setup → Event Overview
   
   
3. Define your Email Profile in Admin → Transfer Profiles
   
   
4. Define the Action: Setup → Action Group Overview

• a new Action Group
• Define your Thermal Event as trigger in the Event Selection
• Define in the Action 1 your new Defined Email Profile
  
  

Here a similar Setup of Thermal Events to trigger a Audio Action instead of a Email Action!

How To Configure a Thermal Radiometry Event and Audio Announcement

This tutorial explains the step by step configuration of the application below: When the temperature value of the defined area in Thermal Cameras with Thermal Radiometry goes over 45 degrees Celsius, then the camera will make an announcement through its speaker. General Assumptions Please make sure that you have connected your camera to the network properly and your camera is reachable. This tutorial assumes that the camera is in factory default configuration except for network settings. C…