How to enable Onvif Integration Protocol Mobotix Q26

Hello Everyone, I need to add some Mobotix Q26 to a third party NVR.
They have an old Firmware I think and I am trying but no feedback, when turning ONVIF ON it does not give the possibility to add an account for Onvif.
Please can anyone help to find a new Firmware for Q26 and how to enable onvif.

Product Type: MOBOTIX Q26
Serial Number:
Ethernet Hardware Address: 00:03:C5:16:0C:8E
Factory IP Address:
Camera Code: 160C8E
Board Revision: 6.2
Processor Type: ARMv7 Processor
Operating System
Type: Linux
Release: 4.6.0-rc5+
Release Date: #1 Wed Apr 12 09:08:43 CEST 2017
File System
Release: MX-V5.0.0.127
Creation Date: 2017-04-27 16:08:35 CEST
Initial Size: 61112 KB
ActiveX Version:

Please follow this link for our newest Q26 Firmware.
Q26 Firmware

Hi Angel,
Thank you for your support.
I have updated the Q26 camera to newest software but when enable ONVIF it does not shows the abbility to change “ONVIF profiles” .
Can you please help me where to change ONVIF to H264 and to change the frames?

Best regards

going into the admin menu ->camera admin->integrations protocols and change it to Onvif.

Make sure to change the username and password to be able to add them.