Application Tutorial --> Configure an Output Box and a Keypad

Mx-AndyD · February 26, 2020, 2:51pm

Configure an Output Box and a Keypad

This tutorial explains the step by step configuration of the application below :

Connecting a door, gate, window and garage door to an Output Box and open/ close them by pressing a PIN code in a Keypad and/or through MxManagementCenter.

Mx_AT_Door_Window_Out_Keypad_en_180626.pdf (3.6 MB)

Topic		Replies	Views
How to Configure a Keypad to turn a Light On and Off Knowledge Base EN gettingstarted , howto	2	1498	March 7, 2023
How to reset the Door Station and MxBus modules Knowledge Base EN reset , doorstation , howto	0	4529	February 4, 2018
Replace Door Station camera Keeping original Keypad, BellRFID, and or DoorMaster Door Station - Discussion doorstation , howto	0	469	September 9, 2022
How to reset MxBus modules FAQ EN reset , mxbus , module	0	5126	March 29, 2018
Wiring of the Door Station Knowledge Base EN doorstation , wiring	0	3747	February 4, 2018

Application Tutorial --> Configure an Output Box and a Keypad

Related Topics